Standard Chuck Dia. Main Spindle (L)………… 10″
Standard Chuck Dia. Second Spindle (R)…….. 10″
Maximum Swing……………………………………. 30″
     NOTE: Tool eye body may limit maximim swing.
Maximum Swing using Y-Axis……………………. 26″-30″
Maximum Swing over Cross Slide………………. 30″
Maximum Cutting Diameter: Chucking…………. 30″
Maximum Cutting Length…………………………. 60″
Maximum Distance Between Chuck Faces……… 60.2″

MAIN SPINDLE SPECIFICATIONS (L):
Spindle Nose……………………………………….. A2-8
Spindle Bore………………………………………… 3.46″
Maximum Bar Work……………………………….. 3.0″ Dia.
Spindle Speed………………………………………. 4,000 RPM
Spindle Index (Programmable)………………….. 0.0001 Deg.
Spindle Horsepower (Cont./30 Mins.)………….. 30/40 HP (AC)
Spindle Torque……………………………………… 534 ft-lbs.

SECOND SPINDLE SPECIFICATIONS (R)
Spindle Nose………………………………………… A2-8
Spindle Bore………………………………………… 3.46″
Spindle Speed………………………………………. 4,000 RPM
Spindle Index (Programmable)………………….. 0.001 Deg. (0.0001 Deg. C-Axis Optional)
Spindle Horsepower (Cont./30 Min.)…………… 30/35 HP (AC)
Spindle Torque……………………………………… 368.8 ft-lbs

TURRET AND TOOLING SPECIFICATIONS:
Type of Turret……………………………………… 1 Position w/ATC
Tool Shank Height…………………………………. 1.0″
Tool Size (Boring Bar Max. Dia.)……………….. 1.5″
Tool Selection Method……………………………. Random
Tool to Tool ATC Time……………………………. 1.3 Sec.
Max. Tool Dia. w/All Pockets Full……………….. 3.54″
Max. Tool Dia. w/Adjacent Pockets Empty……. 4.92″
Max. Tool Length (From Gage-Line)……………. 15.75″
Maximum Tool Weight…………………………….. 22 lbs.
Rotary Tool Spindle Speed………………………. 12,000 RPM
Rotary Tool Spindle Horsepower (20%ED)……. 25 HP (AC)
Rotary Tool Torque (20%ED)……………………. 88.5 ft-lbs.
Maximum Face Mill………………………………… 4″
Maximum End Mill………………………………….. 1.25″
Maximum Drill………………………………………. 1.25″
Maximum Tap………………………………………. 1-8 UNC

AXIS TRAVELS:
B-Axis………………………………………………. 225 degrees (0.0001 degree increments)
Y-Axis………………………………………………. +/- 4.53″
X-Axis………………………………………………. 24.8″
Z-Axis………………………………………………. 62.41″
Second Headstock W-Axis………………………. 60.24″

AXIS RAPID RATES:
Y-Axis………………………………………………. 1024 IPM
X-Axis………………………………………………. 1496 IPM
Z-Axis………………………………………………. 1496 IPM
Second Headstock W-Axis……………………… 1181 IPM
C-Axis………………………………………………. 555 RPM

GENERAL SPECIFICATIONS:
Floor Space (WxL)…………………………………. 201.2″ x 92.24″
Machine Height…………………………………….. 114.6″
Total Power Required (Machine Only)…………. 83.5 KVA
     NOTE: Actual machine main transformer KVA rating will be greater.
Air Requirements………………………………….. 72.5 PSI/24.7 CFM
Machine Weight……………………………………. 28,660 lbs.

Optional Equipment:

213 psi Coolant, Side Exit Chip Conveyor, 2nd Spindle C-axis, 40 Tool KM Tool Magazine.